Liczymy pasujące modele…
This is an HO scale model of the Pennsylvania Railroad viaduct over the Schuylkill River in Phoenixville, Pennsylvania. The model was developed using information from HistoricBridges.org and Google Maps in Fusion 360. For more information…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
This is a set of Viaducts that can be used with Marklin's Z scale track. It's limited to an oval configruation at the moment, but still pretty cool. This is an update to a previous design I made, which improves the clip used to keep the…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
Viaduct rail compatible with BRIO and IKEA wooden rails. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini Straight Track - B2 Mini Straight Track - C2…
For mobile layouts KATO’s Unitrack is the first and only choice in n-scale and one of the best track systems in general: https://unitrack.katomodels.com/what_is_uni_track The system includes viaduct tracks and as I have made a viaduct for…
Here are Piers/pylons for KATO’s viaduct track. Compared to original piers here you can find piers in 5mm steps up to a height of 120mm giving a smooth ramp to never reached heights of viaducts. The height is defined from ground level to…
For single track versions see: https://www.printables.com/model/1243296-diy-viaduct-for-katos-unitrack-n-scale/files Here are now the double track versions. I made viaducts for all possible combinations of tracks offered by Kato, so you…
Time to extend the DIY-viaduct with points/switches and to add DIY-signals! See pictures for more information. Here the advantage of possible cable routing inside the DIY-Viaduct for Kato’s Unitrack comes to the light. For viaducts and…
For single track viaducts see: https://www.printables.com/model/1243316-diy-piers-for-viaduct-for-kato-unitrack Here are Piers/pylons for KATO’s viaduct double tracks in two styles, one that fits to single track piers (23-015…017) and the…
With the circular viaducts, the standard Brio bridge height can be reached in a 270° turn. A variant for driving up and down is available for download. The two circular viaducts are designed in two parts so that they can be printed with…
A turnout viaduct for my N-Scale train viaduct system. This goes with the brackets and other components my printed viaduct system. This turnout accommodates 4 mainline tracks with Kato's track system and allows for offramps from the…
This is a splitting viaduct section built to be wall mounted. This goes with the brackets and other components my printed viaduct system. The support brackets for this are located here:…
A simple curved bridge over a mountain compatible with brio trains. It was printed with a 3% gyroid infill. A support must be used for the tab that sticks out. The overhangs under the bridge should not need supports.
As there was no straight ramp available for the z-scale viaduct from @Josh3d I made one :) Made out of 3 110mm straight pieces (a little steeper than Märklin suggests but still works flawlessly) Designed to be printed best with 0.12mm…
This is a support for a viaduct to use with Brio and compatible wooden toy train sets (Ikea Lillabo, Melissa & Doug, Thomas & Friends, etc.). It's designed to grip a 40mm wide wooden track segment, and features a tunnel underneath wide…
I found used KATO-bridges and liked to use them with viaduct tracks on their piers/pylons. But you need an adapter piece to do so, which is normally delivered with the bridges itself. Ones lost; you can’t buy it as separate spare part (at…
Brio Railway Viaduct A great addition to the Brio railway. Magnets measuring D8x4mm must be glued in place (IMPORTANT: pay attention to the magnetic alignment!). The D-shaped feet allow a track to run through the viaduct. To use the…
On request from user of such beautiful KATO-train sets, like the ICE4 or the Pacific Surfliner, I made a wider version of the viaduct for Kato’s Unitrack:…
These models are to lift KATO NSCALE VIADUCT SHOPS For window and the front entry I used the following: 10 Pack 12x12x.02” Clear Plastic Sheet, Plexiglass Craft Plastic Sheets PET Flexible Lightweight Clear Plastic Sheets for DIY Craft…
Customizable in OpenSCAD. My is for TT scale. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: Yes **Resolution:** adaptive 0.07 to 0.2 Infill: 25 **Filament:** na3d PLA silver Notes: Printed upside down, in 3 pcs.…
Of course, tighter radii are always a compromise between reality and the space available for a model railway layout, but for those cases where a tighter radius is needed, here I offer DIY viaducts with slightly wider spacing between the…
Kato offers viaduct tracks with a height of 60mm (track base above bottom). At same time and by whatever reason T-Trak-modules, that are heavily based on Kato’s Unitrack system, are defined at a height of 70mm. Isn’t this crazy? But here…
This viaduct is not fron Sodor, but it can be suitable
Having DIY-viaducts for KATO’s Unitrack in n-scale with cable routing below the track, there was still the missing piece – a pier, that can route the cable down to the ground. Here is the solution: a pier/pillar, that is not only able to…
Having published DIY-double track piers for viaducts, someone pointed out, that the 6-leg piers are more stable, than the standard single column piers and it would be great to have an extension, to use them for a 2nd tier to. So, I…
To complete the wider versions of my viaducts here you can find some special parts for turnouts/points and signals but also some parts to connect double track sections with single track. The advantage of having a viaduct that works also…
These pieces are specifically designed to adapt MichalFanta's extended train track set to BRIO and IKEA track pieces. Since I already printed a number of tracks from his awesome set, I did not want it to go to waste, so I created these…
Update of my previous design of adaptable piers: https://www.printables.com/model/1442162-adaptable-piers-with-cable-routing-for-diy-viaduct Following improvements: Double track piers added and designed in a way it can be mixed with…
Having created a DIY-print version of Kato’s viaduct track and some more Add-ons to it, as well as the original, I was several times asked, if I could design a similar viaduct to Kato’s H0-Unitrack, especially as Kato itself doesn’t offer…
This is an Add-on to my DIY-viaducts for Kato’s Unitrack of standard width:By gluing these pieces to your viaduct, you may equip it with Kato’s catenary poles. Please note, that this is made for my DIY-viaducts only. For original…
Customizable in OpenSCAD. My is for TT scale. Print Settings Printer Brand: Anet Printer: A6 **Rafts:** No Supports: Yes **Resolution:** adaptive 0.07 to 0.2 Infill: 25 **Filament:** na3d PLA silver Notes: Printed upside down, in 3 pcs.…
Here's a new version of the piers for KATO’s track systems. The goal was optimal stability with compact storage, as well as the ability to use them not only for viaducts but also directly with Unitrack track. Especially with temporary…
This is an N-Scale model train viaduct. I built this to be a wall mounted bridge. The bridge section is loosely based on the Vancouver Skytrain. For other components of my rail bridge, look up my profile. There's about 20 different parts…
This is an N-Scale model train viaduct bracket. I built this to be a wall mounted bridge. The bridge section is loosely based on the Vancouver Skytrain. For other components of my rail bridge, look up my profile. There's about 20…
This is a small square viaduct section built to be wall mounted. This goes with the brackets and other components my printed viaduct system. The support brackets for this are located here:…
Wall bracket to go with my double track viaduct design: https://www.printables.com/model/317054-double-track-viaduct-for-n-scale-trains This section accommodates 2 mainline tracks with Kato's track system and allows for offramps from the…
This is a curve for my system of viaducts. This goes with and other components my printed viaduct system. This section was setup as a cable stay bridge, suspended from my ceiling. The other parts for this are located here:…
I printed several of the wonderful viaduct and bridge pieces from Michal Fanta's Wooden Train Track files for my son, but found that the viaduct pillars didn't match the height of our existing raised tracks. This is a very simple riser…
This is a remix for my previous model in case you have a use case to need just one of the narrow W6 or W7 pillar pieces from Michal Fanta's Train Track Pieces . The original model is good for when two are paired together, but can't always…
