Twilight Imperium Ground Forces (two-part for FDM printing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ever FDM print ground forces for TI4? No? Well, if you had, that flagpole would have broken. No Longer!
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
A remix of Saunick's ground-forces model from Thingiverse (https://www.thingiverse.com/thing:4191414) to print the token in two pieces (flagpole and base). I did this since I could not for the life of me successfully FDM print the unit in one piece with any degree of durability/strength. The two parts are press fit. My tolerances are extremely tight and require quite a bit of oomph to fit together. I managed to press fit them all using a set of needle-nose pliers and some body-weight and none of them broke. If you have more difficulty, you might want to make the fitting part of the flagpole a bit smaller or widen the flagpole slot a smidge.
My models were printed with a 0.4mm nozzle at 0.12mm layer height so they're far from perfect, but are certainly usable at the table. I used Kyuubi gold filament from Amazon.