Twilight Imperium Ground Forces (two-part for FDM printing)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ever FDM print ground forces for TI4? No? Well, if you had, that flagpole would have broken. No Longer!
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 65
- Makes
- 0
- Views
- 461
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
A remix of Saunick's ground-forces model from Thingiverse (https://www.thingiverse.com/thing:4191414) to print the token in two pieces (flagpole and base). I did this since I could not for the life of me successfully FDM print the unit in one piece with any degree of durability/strength. The two parts are press fit. My tolerances are extremely tight and require quite a bit of oomph to fit together. I managed to press fit them all using a set of needle-nose pliers and some body-weight and none of them broke. If you have more difficulty, you might want to make the fitting part of the flagpole a bit smaller or widen the flagpole slot a smidge.
My models were printed with a 0.4mm nozzle at 0.12mm layer height so they're far from perfect, but are certainly usable at the table. I used Kyuubi gold filament from Amazon.