Rolling E3D Buggy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Regular size E3D golf cart with real wheels and axels that actually spin. The 3d stress test can move now.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 197
- Wydruki
- 2
- Wyświetlenia
- 859
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
Creation ~ First I created a wheel and axle. Then I cut out room for the axle and wheels in the model. Fit was pretty good first try and wheels spin with very little effort on my hand.
Assembly ~ Press the tapered axels into wheels first, then pop axels into the cutouts on the bottom. You'll see the axels have a flat side you can squeeze through. You must put the wheels on first because they nest into the wheel-wells.
Tuning ~ Everything should spin free, if it rubs try to adjust the wheels. There's not a whole lot you can do at that scale to make it better but you are welcome to try.