Rolling E3D Buggy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Regular size E3D golf cart with real wheels and axels that actually spin. The 3d stress test can move now.
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 197
- Makes
- 2
- Views
- 859
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Share Alike
Creation ~ First I created a wheel and axle. Then I cut out room for the axle and wheels in the model. Fit was pretty good first try and wheels spin with very little effort on my hand.
Assembly ~ Press the tapered axels into wheels first, then pop axels into the cutouts on the bottom. You'll see the axels have a flat side you can squeeze through. You must put the wheels on first because they nest into the wheel-wells.
Tuning ~ Everything should spin free, if it rubs try to adjust the wheels. There's not a whole lot you can do at that scale to make it better but you are welcome to try.