1 / 5
Desk Drawer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drawer for my work desk. The size of drawer is 150mm x 180mm x 42mm.
- Ocena
- 4,714 / 5
- Polubienia
- 140
- Pobrania
- 786
- Wydruki
- 6
- Wyświetlenia
- 11 246
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 6) (Komentarze: 7)Remiksy (1)Kolekcje (248)Powiązane
Drawer for my work desk. The size of drawer is 150mm x 180mm x 42mm.
Print instructions
4 parts for this drawer
- drawer.stl
- Drawer itself to put your goods into
- drawer-frame-left.stl
- Left side frame
- drawer-frame-right.stl
- Right side frame, a mirrored object of left side frame
- drawer-front-panel.stl
- Front panel to attach drawer in the last step
Additional parts
- Screws
- To attach left and right frame to your desk
- I used 3mm x 16mm truss head screw and washers
- Adhesive
- To attach front panel to drawer
- You can also use double-sided tape for this purpose
- Double-sided tape
- This is not mandatory, but it helps you with attaching frames to your desk
Instructions
- Print all 4 parts using 3D printer
- Attach left frame using screws to your desk
- Keep in mind that you'll attach the front panel in the final step, so you need to leave some space for the front panel
- Slide drawer into left frame, then put right frame next to drawer. In this step, I recommend using double-sided tapes to attach right frame to fix the position temporally. Then put screws to right frame.
- Put front panel to drawer using adhesive
Note
- Of course you can create your own front panel which matches your desk and room