1 / 4
Cover/Clip for T- and V-profiles 2020, 2040, 2060 etc.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
20x20mm cover/clip for covering and holding cables in slit of T- and V-profiles such as 2020.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 479
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (19)Powiązane
This clip can be used to cover and hold in place cables in the slit of a T- and a V-profile 2020, 2040 or 2060. It comes in two variants with cover being 1mm or 0.42mm thick. the cover is 20x20mm for both variants. You can scale it in one direction and still make it fit the slit of a V-profile.
Recommended settings are:
- First layer: 0.2mm
- Layer Height: 0.12mm
- Line width: 0.4mm
- Top/Bottom Layers: 4 (so infill is technically 100%))
- Material: ABS/ASA or alike if used in enclosure. Otherwise PLA, PETG etc. is fine.