Monoprice Mini v2 webcam bed mount c270
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed / modified a bed mount for the monoprice mini v2. Using a logitech c270 as the webcam. -Webcam cover and…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Remixed / modified a bed mount for the monoprice mini v2. Using a logitech c270 as the webcam.
-Webcam cover and straight tripod arms taken from - http://www.thingiverse.com/thing:2267182
-Camera connector to the arms taken from - https://www.thingiverse.com/thing:1228521
-Focus ring taken from - http://www.thingiverse.com/thing:1406879
-Bed mount was remixed from http://www.thingiverse.com/thing:1975739 and http://www.thingiverse.com/thing:2267182 . I combined them in order to utilize the two extra holes that were not being utilized. It also has a small indentation for the y axis belt so it does not press up against it.
Wanted the option to move the webcam/arms both horizontally and vertically, So i made different versions of the bed mount and arms in order to customize to your liking.
Two versions of the bed mount:
-bed cam mount - has the connector going vertical - up and down.
-bed cam mount v2 - has the horizontal going - left and right.
Two versions of the arms:
-Tripod arms - simple one directional arms
-Arm pivot - flips the next connecting arm in other direction
I used some spare (4) 6/32 screws and (4) nuts to connect the mount onto the bed. Figure this would translate to 5mm (possibly). m3x20 screws to connect the arms
Webcam does shake a tad when the bed moves, but not too bad for taking timelapses or just streaming/viewing.
Category: 3D Printer Accessories