Monoprice Mini v2 webcam bed mount c270
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed / modified a bed mount for the monoprice mini v2. Using a logitech c270 as the webcam. -Webcam cover and…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 204
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
Remixed / modified a bed mount for the monoprice mini v2. Using a logitech c270 as the webcam.
-Webcam cover and straight tripod arms taken from - http://www.thingiverse.com/thing:2267182
-Camera connector to the arms taken from - https://www.thingiverse.com/thing:1228521
-Focus ring taken from - http://www.thingiverse.com/thing:1406879
-Bed mount was remixed from http://www.thingiverse.com/thing:1975739 and http://www.thingiverse.com/thing:2267182 . I combined them in order to utilize the two extra holes that were not being utilized. It also has a small indentation for the y axis belt so it does not press up against it.
Wanted the option to move the webcam/arms both horizontally and vertically, So i made different versions of the bed mount and arms in order to customize to your liking.
Two versions of the bed mount:
-bed cam mount - has the connector going vertical - up and down.
-bed cam mount v2 - has the horizontal going - left and right.
Two versions of the arms:
-Tripod arms - simple one directional arms
-Arm pivot - flips the next connecting arm in other direction
I used some spare (4) 6/32 screws and (4) nuts to connect the mount onto the bed. Figure this would translate to 5mm (possibly). m3x20 screws to connect the arms
Webcam does shake a tad when the bed moves, but not too bad for taking timelapses or just streaming/viewing.
Category: 3D Printer Accessories