1 / 1
AOS 7 parts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
AOS 7 Parts: VTX Antennas Foxeer Lollipop 4+ MMCX, GPS Matek M10-5883, GoPro Mount, Capacitors mounts
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 1133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (13)Powiązane
Philm0's AOS 7 parts
Parts
- A decent GoPro mount.
- Lots of fillets so the flimsy TPU does not rip apart
- Grip holes for the nut and bolt of the GoPro so they nicely stay in place
- Capacitor holders that go next to the center stack. The inner capacitor diameter is 12.8mm.
- Vertical ExpressLRS T-antenna mount
- Fits best with the BetaFPV antenna, as this one has a small cutout for zipties as well.
- I added a bit of VHB tape in between to make it stop slipping.
- DJI Air Unit brackets
- Print two of them.
- They mount to the 30.5mm stack holes, so you need two of the brackets, two nuts and two bolts with 6mm max length.
- Unfortunately they cover the USB port, so make your activation/rooting/settings before mounting everything.
- GPS + Antenna mount
- The GPS is a Matek M10-5883, the best they currently offer.
- GPS angle is 0 degrees for best magnetometer/compass performance.
- Drop in the GPS, then glue in the extra provided GPS ring to secure it.
- The VTX antenna model is the Foxeer Lollipop 4 Plus.
- I used the extra long tube variant
- Extra cutouts are in the tubes to be able to fit the right angle MMCX connector through there.
- Secure each antenna with a ziptie in the cutout.
- The GPS is a Matek M10-5883, the best they currently offer.