1 / 1
AOS 7 parts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
AOS 7 Parts: VTX Antennas Foxeer Lollipop 4+ MMCX, GPS Matek M10-5883, GoPro Mount, Capacitors mounts
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 122
- Makes
- 0
- Views
- 1,133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Philm0's AOS 7 parts
Parts
- A decent GoPro mount.
- Lots of fillets so the flimsy TPU does not rip apart
- Grip holes for the nut and bolt of the GoPro so they nicely stay in place
- Capacitor holders that go next to the center stack. The inner capacitor diameter is 12.8mm.
- Vertical ExpressLRS T-antenna mount
- Fits best with the BetaFPV antenna, as this one has a small cutout for zipties as well.
- I added a bit of VHB tape in between to make it stop slipping.
- DJI Air Unit brackets
- Print two of them.
- They mount to the 30.5mm stack holes, so you need two of the brackets, two nuts and two bolts with 6mm max length.
- Unfortunately they cover the USB port, so make your activation/rooting/settings before mounting everything.
- GPS + Antenna mount
- The GPS is a Matek M10-5883, the best they currently offer.
- GPS angle is 0 degrees for best magnetometer/compass performance.
- Drop in the GPS, then glue in the extra provided GPS ring to secure it.
- The VTX antenna model is the Foxeer Lollipop 4 Plus.
- I used the extra long tube variant
- Extra cutouts are in the tubes to be able to fit the right angle MMCX connector through there.
- Secure each antenna with a ziptie in the cutout.
- The GPS is a Matek M10-5883, the best they currently offer.