DPS5005 / XYS3580 power supply module case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Module case for several power supply modules. There a two version (with or without space for external power supply).
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 636
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Module case for several power supply modules (DPS5005 / XYS3580….)
There a two version (with or without space for external power supply).
Version1: Bottom_Part_placeholder.stl + Upper_Part.stl
An old power supply (e.g. from and old laptop) can find place in the bottom part. As a nice side effect, the case gets a bit more weight and stays better on the table.
Version2: Bottom_Part_simpleLid.stl + Upper_Part.stl
To place the power supply external you can use this version.
For assembly you need only:
- 4x 3mm screws
- a black and red banana plug
- XT60 male and female plug
There are large side vents to ensure good cooling.
Can be printed without support when bridging is no problem!