FLSun V400 State Led Difussor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount and difussor for a neopixel led for the FLSun V400 effector
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1653
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
When I first saw the gap under the screw of the fan cover on the FLSun V400 effector, I thought it was a perfect spot for a led that would show the printer's state, just like the ones on the voron hotends.
I designed a mount/difussor for a individual neopixel led consisting on 2 parts:
- Mount/difussor: Holds the led in place spreads the light evenly
- Spacer/holder: Serves 2 purposes
- Securing the led and the difussor in place
- Creates a 6mm gap between the fan cover and the fan itself, drastically reducing the fan's noise.
Both pieces are printed with 100% infill and at the lowest layer height you can print. Since models have small walls going too high in could result on some details not being printed.
I recommend printing the difussor in white colored filament. Transparent one could work too, but the light could be too intense.
Suitable for this model of Neopixel led:
https://www.adafruit.com/product/1312