Mini electromagnet for fischertechnik
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
fischertechnik compatible housing for a 10x10mm electromagnet from aliexpress
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 507
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2022-09-19: There was an error in previous versions, please use _v4 FreeCAD file for your own experiments.
fischertechnik compatible housing for a 10x10mm electromagnet from aliexpress ("10*10mm Suction 0.3KG DC 5V/12V/24V Mini Nano solenoid electromagnet electric Lifting electro magnet strong holder cup DIY 12 v", you gotta love these aliexpress autotranslations!).
I used the 12V variant which nominally can lift 0.3 kg. It works fine with the ft-typical 9V to lift a metal ft marble, but gets a bit hot after a while.
Needs an additional M2 screw, ca. 7-8 mm, and two 9.5 mm "Bundhülsen". No soldering needed.
Print the larger part as provided with support touching buildplate, the smaller part prints fine without it.
Please consider leaving a "like" or posting your make as a token of appreciation for my work.
Find my other fischertechnik designs here.
Category: Construction Toys