Hylian Shield
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own design of this iconic shield from Legend of Zelda. Designed in TinkerCad
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 147
- Wydruki
- 1
- Wyświetlenia
- 1816
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
My own design of this iconic shield from Legend of Zelda.
See my base stand file here:
https://www.printables.com/model/319619-hylian-shield-base
and Targ's Sword here:
https://www.thingiverse.com/thing:1411578
Print is about 13 hrs at 0.2mm setting. Standard PLA+ from eSun.
205 first layer, 195 all other
Bed:60C
3M x 12mm screws in the back for a strap. I used leather.
Post print I have fixed the STL to be flat on the back. I didnt realized until after printing that the back had a slight curve that made the back have supports which didnt buff out. Newest STL has been uploaded.
Printed on Anycubic Vyper
Hand painted post with acylic.
Print Settings
Printer:
Anycubic Vyper
Rafts:
No
Supports:
No
Infill:
20%
Filament brand:
eSun
Filament color:
Blue
Filament material:
PLA+
Notes:
Print is about 17 hrs at 0.2mm setting. Standard PLA+ from eSun.
205 first layer, 195 all other
Bed:60C