1 / 9
120mm wheel for scooter / inline skate / hand truck — zdjęcie 1
1 / 9

120mm wheel for scooter / inline skate / hand truck

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Parametric 120mm 3-piece wheel and tire bolted together.

Ocena
0 / 5
Polubienia
14
Pobrania
50
Wydruki
1
Wyświetlenia
687
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

 

Required hardware

 

  • 12x M5x10mm bolts
  • 12x M5 nuts
  • 2x 608 bearings

Assembly Instructions

 

Insert 608 bearings in each half-rim. Insert all the bolts and nuts into the appropriate holes in each half rim. Insert tire into bottom half rim, then insert top half rim. Tighten all the bolts.

 

Print Settings

 

For rims I used 5 layers  for perimeters, 3 layers for bottom and 2 layers for the top. 40% infill, rectlinear.

For tire, 3 layer perimeters, top & bottom perimeters don't matter as about 6 layers are solid. 20% gyroid infill.

TPU material hardness – 91A

 

Printing tpu

I was having trouble with printing tpu, so I need to minimize print time for that part. I also attached a thicker wheel, I was unable to print that successfully.

 

Chunkier tire config:

 

tire_circle = 16;
tire_z_scale = 1.5;

Then on line 102 remove count_multiplier=2 option from connect module call i.e.

 

connect(d_tolerance=-tol, h_tolerance=-tol);

Tagi