120mm wheel for scooter / inline skate / hand truck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parametric 120mm 3-piece wheel and tire bolted together.
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 50
- Makes
- 1
- Views
- 687
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Required hardware
- 12x M5x10mm bolts
- 12x M5 nuts
- 2x 608 bearings
Assembly Instructions
Insert 608 bearings in each half-rim. Insert all the bolts and nuts into the appropriate holes in each half rim. Insert tire into bottom half rim, then insert top half rim. Tighten all the bolts.
Print Settings
For rims I used 5 layers for perimeters, 3 layers for bottom and 2 layers for the top. 40% infill, rectlinear.
For tire, 3 layer perimeters, top & bottom perimeters don't matter as about 6 layers are solid. 20% gyroid infill.
TPU material hardness – 91A
Printing tpu
I was having trouble with printing tpu, so I need to minimize print time for that part. I also attached a thicker wheel, I was unable to print that successfully.
Chunkier tire config:
tire_circle = 16;
tire_z_scale = 1.5;
Then on line 102 remove count_multiplier=2 option from connect module call i.e.
connect(d_tolerance=-tol, h_tolerance=-tol);