Mirror cube/cuboid (corner pieces)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are plastic corner pieces that you can use together with 4 mm thick mirror sheets to make a mirror cube or…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
These are plastic corner pieces that you can use together with 4 mm thick mirror sheets to make a mirror cube or cuboid. Works nicely as a decorative stand/table e.g. as the base of a plant or another decorative item.
Print instructions
The supports are a bit difficult/annoying to remove, but I was able to remove them using just pliers (and safety glasses) and the end result was clean once I was able to get them out.
You may be able to tweak your slicer settings so the supports would be easier to remove, but if you increase the support contact Z distance the slot that needs the supports might become tighter and harder to insert the 4 mm sheet into.