Mirror cube/cuboid (corner pieces)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.36 – €4.11 net (excluding VAT)
For file: mirror_cuboid_corner_piece_x8_4h15m_02mm_pretty.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.73 excluding VAT (range midpoint).
- Weight reported by the author
- 36 g
- Print time reported by the author
- 4.25 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
These are plastic corner pieces that you can use together with 4 mm thick mirror sheets to make a mirror cube or…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 52
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
These are plastic corner pieces that you can use together with 4 mm thick mirror sheets to make a mirror cube or cuboid. Works nicely as a decorative stand/table e.g. as the base of a plant or another decorative item.
Print instructions
The supports are a bit difficult/annoying to remove, but I was able to remove them using just pliers (and safety glasses) and the end result was clean once I was able to get them out.
You may be able to tweak your slicer settings so the supports would be easier to remove, but if you increase the support contact Z distance the slot that needs the supports might become tighter and harder to insert the 4 mm sheet into.