1 / 2
(Halo) helmet flashlight lenses (Mjolnir mk VI)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flashlight lenses for Halo Mjolnir helmets. Use your slicer to scale them to fit.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (21)Powiązane
Flashlight lenses for Halo Mjolnir helmets. Use your slicer to scale them to fit.
I designed these for Rainyfire's helmet (scaled up to 107% in my case): https://www.thingiverse.com/thing:2739764
You'll probably want to use a resin printer for this. I used a Mars 2 with Anycubic Clear resin at 0.02mm layer heights. Clean well, cure for 1-2m under water and finish with some clear coat spray.