Go Pro Arca Swiss Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I use Arca-Swiss compatible heads on my tripods and wanted the ability to mount my GoPro Hero7 easily without hassle.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 372
- Wydruki
- 7
- Wyświetlenia
- 1318
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
I use Arca-Swiss compatible heads on my tripods and wanted the ability to mount my GoPro Hero7 easily without hassle.
At the time of designing this I couldn't find any other alternatives that mad me happy.
An additional M5 (0.8mm pitch thread) nut (preferably a Cap Nut) is required to allow the mount to be attached to the GoPro correctly.
This nut should be a push/pressure fit, but for added peace of mind I adhered mine with two-part epoxy.
If you are not using the bolt that came with the GoPro then an appropriate substitute must also be sourced.
Print instructions
- Printed in PETG
- 0.1mm layer height
- Cubic infill @ 20%
- 4 perimeters