Tray for tilt-down drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Make use of lost space in front of the sink cabinet.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 331
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Required Hardware:
- a pair of specific hinges such as: https://www.amazon.de/-/en/Rev-Shelf-LD-0220-50SC-Close-Hinges/dp/B018A36II6
- 6mm thick board for the back and bottom of the tray
There are 2 different sizes:
- the small one: 15cm tall / 8cm deep
- the big one: 15cm tall / 12cm deep
FreeCAD file is also attached so that you can adjust to your cabinet/sink/panel sizes.
The mounting system is rather sub-optimal; screwing the second side is really painful and requires some 90° angle-drill adapter or manual screwing… for me this was too late, do not hesitate to remix.
Print settings: white PLA, 0,2mm, infill 20%, no support.
[EDIT 29 Apr. 2024]: After 18 months of daily use the bottom of the big drawer broke. Adding a v2 for the big drawer with more robust bottom and additional brackets.