1 / 3
Tray for tilt-down drawers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make use of lost space in front of the sink cabinet.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 26
- Makes
- 0
- Views
- 331
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Required Hardware:
- a pair of specific hinges such as: https://www.amazon.de/-/en/Rev-Shelf-LD-0220-50SC-Close-Hinges/dp/B018A36II6
- 6mm thick board for the back and bottom of the tray
There are 2 different sizes:
- the small one: 15cm tall / 8cm deep
- the big one: 15cm tall / 12cm deep
FreeCAD file is also attached so that you can adjust to your cabinet/sink/panel sizes.
The mounting system is rather sub-optimal; screwing the second side is really painful and requires some 90° angle-drill adapter or manual screwing… for me this was too late, do not hesitate to remix.
Print settings: white PLA, 0,2mm, infill 20%, no support.
[EDIT 29 Apr. 2024]: After 18 months of daily use the bottom of the big drawer broke. Adding a v2 for the big drawer with more robust bottom and additional brackets.