Dry wall electric outlets drilling guide 68 mm with pocket level attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a drilling guide for 3 sockets/outlets of standard 68 mm with pocket level magnet piece.
- Ocena
- 0 / 5
- Polubienia
- 47
- Pobrania
- 213
- Wydruki
- 0
- Wyświetlenia
- 1505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to drill another two holes in my drywall to install another two sockets /outlets.
The main piece can be used as a drilling guide by itself however I wanted to add the possibility to add another outlet right/left from an existing socket. Therefore you can use the drop in to center the guide around an existing hole.
The standoffs provide support for a 6x2mm magnet, you can glue that in and use stabila pocket magnetic level to align holes properly. Both versions of the level work - mind polarity before gluing the magnet permanently.
The bottom of the drilling guide has a groove to put in a silicone bead and make it less slippery on the surface.
After printing glue the pin inside the bottom of the drop in. You can then use it as a center punch.
This drilling guide has following dimensions:
68 mm hole diameter
71 mm spacing
250 mm length
110 mm height
5 mm thickness
Silicone bead: https://amzn.to/3UUviso
Slot-in Magnets: https://amzn.to/3OnhT9C
Stabila pocket PRO magnetic: https://amzn.to/3tL6kQo
my preferred cyan glue: https://amzn.to/3URA89Q