Dry wall electric outlets drilling guide 68 mm with pocket level attachment
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a drilling guide for 3 sockets/outlets of standard 68 mm with pocket level magnet piece.
- Rating
- 0 / 5
- Likes
- 47
- Downloads
- 213
- Makes
- 0
- Views
- 1,506
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I needed to drill another two holes in my drywall to install another two sockets /outlets.
The main piece can be used as a drilling guide by itself however I wanted to add the possibility to add another outlet right/left from an existing socket. Therefore you can use the drop in to center the guide around an existing hole.
The standoffs provide support for a 6x2mm magnet, you can glue that in and use stabila pocket magnetic level to align holes properly. Both versions of the level work - mind polarity before gluing the magnet permanently.
The bottom of the drilling guide has a groove to put in a silicone bead and make it less slippery on the surface.
After printing glue the pin inside the bottom of the drop in. You can then use it as a center punch.
This drilling guide has following dimensions:
68 mm hole diameter
71 mm spacing
250 mm length
110 mm height
5 mm thickness
Silicone bead: https://amzn.to/3UUviso
Slot-in Magnets: https://amzn.to/3OnhT9C
Stabila pocket PRO magnetic: https://amzn.to/3tL6kQo
my preferred cyan glue: https://amzn.to/3URA89Q