Triple bell pneumatic air horn
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A scalable solid model based on my original horn design https://www.printables.com/model/235142-air-horn/comments/367406
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 280
- Wydruki
- 1
- Wyświetlenia
- 1607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial
Wanted to make an air horn for my kids ride on truck similar to a train or large truck horn.
designed to print without support and then bolt together with 1/4 20 bolts.
use a few layers of 0.01~inch acrylic or metal (like the walls of an aluminum can) for the diaphragm. You will need to have an air tight seal between the resonator and the back cap.
This thing is loud… like will scare people loud.
no upgraded with 3 times the number of bells so you can harmonize them to your hearts desire. Just use the parameters menu in fusion to change the scale of each section of the models.
Please let me know how it sounds because I have not printed the multi horn model yet.