1 / 4
Adapter for 56mm holes to a generic MIGE mount. — zdjęcie 1
1 / 4

Adapter for 56mm holes to a generic MIGE mount.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

56mm is a generic bolt pattern used by Fanatec and other brands to mount dashboards, meters, fans, etc.

Ocena
0 / 5
Polubienia
1
Pobrania
50
Wydruki
0
Wyświetlenia
471
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

I have a MIGE/Simucube motor mount that doesn't have a 56mm pattern to mount a dashboard or meter. I designed this to add a one.

It requires a pair of M6 nuts, and I recommend some locking nuts (nyloc, non flanged). 

Print with around 8 perimeters, so that it's strong where it needs to be strong, rather than printing it at 100% infill.

Keep in mind the distance required to clear the back of the adapter. It's very likely that this will fit only a handful of mounts.

Tagi