1 / 5
Magnetic battle mat (chessex) hanger — zdjęcie 1
1 / 5

Magnetic battle mat (chessex) hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hang your 90cm/35~ inch chessex battle mat on a wall to stop creasing with this magnetic hanger.

Ocena
0 / 5
Polubienia
3
Pobrania
11
Wydruki
1
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hang your 90cm/35~ inch chessex battle mat on a wall to stop creasing with this magnetic hanger.

It has been split into smaller pieces so it can be printed on small printers.

Components

  • 10mm x 5mm neodymium magnets - 12 units
  • Screws of your choosing depending on your wall type to fasten the back panel to the wall - 2 or 4 units

Assembly

  1. Snap the dove tail pieces in and glue with superglue. Use the 3mf with all the pieces as reference.
  2. Insert the magnets into the magnet slots and make sure to orientate them correctly.
  3. Insert the magnet caps to secure the magnets, they should be quite snug and you can use a rubber mallet if careful otherwise feel free to scale or sand them a bit if too tight.
  4. Attach the back panel to your wall with 4 x screws

Tagi