1 / 5
Magnetic battle mat (chessex) hanger — image 1
1 / 5

Magnetic battle mat (chessex) hanger

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hang your 90cm/35~ inch chessex battle mat on a wall to stop creasing with this magnetic hanger.

Rating
0 / 5
Likes
3
Downloads
11
Makes
1
Views
256
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Hang your 90cm/35~ inch chessex battle mat on a wall to stop creasing with this magnetic hanger.

It has been split into smaller pieces so it can be printed on small printers.

Components

  • 10mm x 5mm neodymium magnets - 12 units
  • Screws of your choosing depending on your wall type to fasten the back panel to the wall - 2 or 4 units

Assembly

  1. Snap the dove tail pieces in and glue with superglue. Use the 3mf with all the pieces as reference.
  2. Insert the magnets into the magnet slots and make sure to orientate them correctly.
  3. Insert the magnet caps to secure the magnets, they should be quite snug and you can use a rubber mallet if careful otherwise feel free to scale or sand them a bit if too tight.
  4. Attach the back panel to your wall with 4 x screws

Tags