Ender 2 Pro 4010 Blower Fan Ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Left and right fan ducts that attach to a 4010 blower fan
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 212
- Wydruki
- 0
- Wyświetlenia
- 1054
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version. The short version is 2mm shorter than the tall version. On my modified Ender 2 Pro hotend, I use the long version.
If you have dual fans, a left fan version is supplied. I used a mount that The 300lb Gorilla designed for me to mount the fan along with the EZABL micro. To mount the fan on the left side, I drilled 1.5mm holes for the top holes and used M2 bolts. The duct mounted with 2 bolts with nuts on the bottom.
The right duct mounts with the stock M2 bolts threaded into the stock mounting plate.
Print settings:
- Layer height: 0.2mm
- Infill: 20%
- Material: ABS
- Supports: From build plate only. You mainly just need supports under the screw mounting points.
- Orientation: Print with the duct on its back against the build plate