Ender 2 Pro 4010 Blower Fan Ducts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Left and right fan ducts that attach to a 4010 blower fan
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 212
- Makes
- 0
- Views
- 1,054
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I pieced together a hotend for my Ender 2 Pro and the stock part fan duct would no longer work for my needs. I designed these ducts to replace the stock ducts. YMMV on if it'll fit your printer or not. There is a tall and short version. The short version is 2mm shorter than the tall version. On my modified Ender 2 Pro hotend, I use the long version.
If you have dual fans, a left fan version is supplied. I used a mount that The 300lb Gorilla designed for me to mount the fan along with the EZABL micro. To mount the fan on the left side, I drilled 1.5mm holes for the top holes and used M2 bolts. The duct mounted with 2 bolts with nuts on the bottom.
The right duct mounts with the stock M2 bolts threaded into the stock mounting plate.
Print settings:
- Layer height: 0.2mm
- Infill: 20%
- Material: ABS
- Supports: From build plate only. You mainly just need supports under the screw mounting points.
- Orientation: Print with the duct on its back against the build plate