Oreck XL motor mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Due to a motor bearing failure in my mothers Oreck vacuum cleaner totally melting the plastic around the screw holes,…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Due to a motor bearing failure in my mothers Oreck vacuum cleaner totally melting the plastic around the screw holes, I modelled and printed one of these replacements.
Printed in ABS 100% infill with supports everywhere and brim (Cura)
I've added standoff support legs with wide bases underneath to help with bed adhesion after a failed attempt. these are easily removed after printing.
A no standoff version is included if you prefer.
BTW the nut holding the fan is clockwise to unscrew not the normal anticlockwise.
Print Settings
Supports:
Yes
Resolution:
0.3mm
Infill:
100%
Filament:
Any ABS
Notes:
Use Brim if possible
Category: Other