Oreck XL motor mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Due to a motor bearing failure in my mothers Oreck vacuum cleaner totally melting the plastic around the screw holes,…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Due to a motor bearing failure in my mothers Oreck vacuum cleaner totally melting the plastic around the screw holes, I modelled and printed one of these replacements.
Printed in ABS 100% infill with supports everywhere and brim (Cura)
I've added standoff support legs with wide bases underneath to help with bed adhesion after a failed attempt. these are easily removed after printing.
A no standoff version is included if you prefer.
BTW the nut holding the fan is clockwise to unscrew not the normal anticlockwise.
Print Settings
Supports:
Yes
Resolution:
0.3mm
Infill:
100%
Filament:
Any ABS
Notes:
Use Brim if possible
Category: Other