MPCNC Primo J Tool Mount (Burly remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal to me. So I remixed it for all to enjoy. The original stl file I used is the MPCNC Burly J 6-32 tool mount:
https://www.thingiverse.com/thing:1671517/files
Since that stl file was non-manifold, first I had to re-mesh it in F360 (aka "water sealing"). Then I punched out the pipe bolt holes for M5 clearance, and upped the counterbores to 9mm diameter to fit the M5x30 allen bolts I use. Ironically, despite a 'keep sharp edges' remesh operation and mesh boolean, the stl file size actually shrunk!
Print Settings
Rafts:
No
Supports:
No
Resolution:
.0001
Infill:
27%
Filament: wan hung lo na magenta
Category: Machine Tools