MPCNC Primo J Tool Mount (Burly remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 66
- Makes
- 0
- Views
- 310
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Not that there is anything wrong with drilling the holes out on a Burly tool mount, but that just didn't sound optimal to me. So I remixed it for all to enjoy. The original stl file I used is the MPCNC Burly J 6-32 tool mount:
https://www.thingiverse.com/thing:1671517/files
Since that stl file was non-manifold, first I had to re-mesh it in F360 (aka "water sealing"). Then I punched out the pipe bolt holes for M5 clearance, and upped the counterbores to 9mm diameter to fit the M5x30 allen bolts I use. Ironically, despite a 'keep sharp edges' remesh operation and mesh boolean, the stl file size actually shrunk!
Print Settings
Rafts:
No
Supports:
No
Resolution:
.0001
Infill:
27%
Filament: wan hung lo na magenta
Category: Machine Tools