343 models
I am currently building a MPCNC Primo using 3/4in EMT conduit which is the C-23.5mm version on the @ V1 Engineering site. You can find more info about the MPCNC at https://docs.v1engineering.com/mpcnc/intro/, and the files are available…
Simple endcap for the 25mm MPCNC version. Can be retrofitted due to it being open. Has a larger diameter and requires some squeezing to get into the tubing but will therefore hold tightly. The corners are also rounded to protect the…
I needed to edit the endstop and wanted a .step to use as a basis. I used the original part and translated it to a step file. Category: 3D Printer Parts
Hollow CNC - Mostly Printed CNC inspired by Dremel CNC It was an attempt to improve rigidity for Dremel CNC by doing following: adding additional 12mm rods to Y axis, moving spindle as close to X axis as possible to reduce lever arm,…
Based on the idea of MPCNC Dual andstop ( https://www.thingiverse.com/thing:2847042 ) I created this thing to have the two endstop for XY axis attached to the rollerplate, so that I can have stepper motor and endstop wires inside drag…
Ajouter un bouton d’arrêt d'urgent sur le boitier du contrôleur LCD de Ryan (V1E) pour la MPCNC Router. Vous pourrez ainsi interrompre le travail en cours, en cas de problèmes, depuis le boitier LCD. Add a Kill Switch button on Ryan's LCD…
MPCNC Basis Vermessungshilfe Zum rechtwinkligen Ausrichten der Basis/Füße der MPCNC Teile: M4 Schrauben und Mutter T-Profil 15 x 15 x1,5 mm Aluminium Klemmen MPCNC base measuring aid For aligning the base/feet of the MPCNC at right angles…
Hollow CNC - Mostly Printed CNC inspired by Dremel CNC It was an attempt to improve rigidity for Dremel CNC by doing following: adding additional 12mm rods to Y axis, moving spindle as close to X axis as possible to reduce lever arm,…
Upgrade your MPCNC Primo with linear guides. Info: Make sure that your tubes have a diameter of exactly 25 mm. What you need: 6x LM25UU 4x Circlip Ø=42mm and the normal parts of the MPCNC Primo. To Print: 2x Upper_belt 2x Upper_belt_M 2x…
Also included .dxf files for milling Can also be used with 5/16" or 8mm Bolts and washer just insert the nut in the knob How I Designed This Category: Tools
Spring loaded pen holder for MPCNC Primo with Makita. It was designed to hold inexpensive BIC biros but works with other pens/pencils too. A small spring from an old spring loaded pen was inserted inside the top holder, see photo.
This mount allows the fixed and mobile bases from the original model to mount onto an MPCNC Primo with a 55mm spindle.
Ich verwende ein 1,5kw Spindel. Ich habe den Saugschuh von “agryson” an diese angepasst. Das Original findet ihr hier: https://www.printables.com/de/model/350439-mpcnc-primo-dust-shoe-makita-router
Now that the original holder has broken several times, I have decided to make a reinforced version. The holes are for M5 screws with hexagon socket head. I thought the original design for Phillips screws was no longer up to date ;)
The adapters are intended for use when aluminium profiles are to be used instead of pipes. The parts are printed with the same settings as the rest. First they have to be screwed onto the aluminium profile, then the corner can be mounted.…
This is a simple wedge style anchor, akin to an old school bicycle stem for the handlebars. I originally tried Don Gamble's design of a basket at: https://www.thingiverse.com/thing:4622031 but didn't get the scaling right for my EMT based…
This is the first model I designed in Fusion360. It served my purpose and I can screw my cable chain securely attached to the 25mm tubes. It is made so you can easiely print the two parts and don't have to detach your MPCNC at all. Using…
Prevents nuts from falling out of the "nut-trap". After a couple of tool change nuts became loose and fall off, I had to remove the nut trap to get them in again. Quite annoying, so with this mod nuts should stay in place. No need of…
I designed this MPCNC enclosure from scratch in Fusion360, and then made a few videos about the upgrades (below). The key features are easy panel removal for machine access and cleaning, and the magnetic half-doors allowing you to fold…
This custom-designed holder securely mounts a 55mm motor for use with an electric hot stick knife or cutting blade, compatible with MPCNC setups. Ideal for applications requiring precision foam, wax, or Styrofoam cutting, this holder is…
This is an independent floating dust shoe designed for the MPCNC Primo, specifically made to fit an AMB 1050 FME spindle. It allows unrestricted movement in both the X and Y axes. The lower part of the dust shoe is detachable (using…
MPCNC Bracket for Long Conduit : It is really advisable to install bracket when your conduits are longuer than 80cm to avoid chattering. Compatible with 5/16 US or M8 ISO EU Threaded shaft and nuts Conduit Diameter adapter for 23.5mm,…
Tool holder, for standard spindle with 65mm diameter. Warning : it was designed so that the tool is closer to the Z axis, may not be suitable for all tools. A dxf plot of the profile of the MPCNC tool mount is provided and will help you…
Simply print off either the 23.5, 25, or 25.4mm OD model for your size of conduit, insert 2 ea. M5x30mm screws and 2 ea M5 nylock nuts(from the BOM), then your Z-rail flush with the “flush end” printed on the jig, then use the 2 holes to…
This group of parts implements Cable Management Drag Chains on V1 Engineering MPCNC Primo model. Drag Chains for all three axises are supported. The following hardware is used: 5ea M3x12 Counter Sunk Flat Head machine screws and lock nuts…
This set of design provides a mount for the Dremel 4000 router unto the Primo version of MPCNC (Mostly Printed CNC). Print Settings Resolution: .025 Infill: 35% Notes: PTEG is recommended for these parts since strength and some…
Remixed model for the WESCO model WS5047 router, made from the stl published on Thingiverse by the user @Hobgoblet (https://www.thingiverse.com/thing:3500550). Print Settings Printer: Longer LK4 Rafts: Yes Supports: Doesn't Matter…
I saw endcaps for other builds for MPCNCs in other pipe sizing so I wanted to make an endcap of my own to share with other builders. It's a nice addition to keep the dust out of one more place and to make the machine look a little bit…
Pokud se Vám model líbí dejte mi lajk. Model boxu - doporučuji tisknout v nějaké barevné kombinaci dle svého vkusu. Box na zdroj je záměrně udělán tak aby pod zdrojem byl prostor na proudění vzduchu, je tam dostatek otvorů pro větrání aby…
This is a stronger version of the V1 Engineering Z-Coupler without play in the Z-axis. You can use a pillow block bearing like this one: https://amzn.eu/d/bexFy22
MPCNC Primo 25mm (Type F) squaring helper This helps you on getting your MPCNC Primo squared. You will need a folding rule, I used a Wiha Longlife 37067 made out of composite plastic. You have to adjust the .step that your folding rule…
sturdier component for holding the core and bearings for xy axis maybe someone will find it useful, worked magic fo me printed in cheap PLA, 0.2 layer height, 30% cubic infill, no supports needed, 4 perimeter and 4 layer for bottom and…
Pokud se vám model líbí dejte lajk - pokud budete potřebovat něco upravit neváhejte mne kontaktovat. Kompletní kabelový management pro MPCNC, po menších úpravách půjde určitě použít i pro 3D tiskárnu. Vše je navržené pro uložení na…
This is a wire clip that fits into the Z Axis tube for an MPCNC. It retains the power cables in position on the z-axis for the router. Designed around a Dewalt 660 router. Category: 3D Printer Accessories
08/13 - Revised Wire inputs (larger and on same face now), adjusted Nano board position to allow for usb connection without removing from mounts. 08/05 - Reduced diameter for circuit board mounting hole ID's slightly. Updated lid rim…
This will allow for mounting\clamping the 12v 6A power supply from a MPCNC kit to a board\surface. Print 2 and fasten with 2 screws each. In case the power supply varies this worked for a Kastar 12v 6A power brick. Category: 3D Printer…
These brackets allow for mounting a 1" aluminum angle support along the X axis to a MPCNC. These offset the angle slightly rearward to clear the Z axis and are ~40mm in height above the stepper bracket mounting holes in order to clear the…
I am absolutely thrilled with the LowRider 2! Many kudos and thanks to Ryan and everyone who helps him!! Thank you!!! My reason for this remixed LowRider2 “X2_plate.STL” is the “Saga of the Sagging Stepper Motor” (a couple of PLA parts…
This is a remix of a remix of a remix. :-) I liked the first remix — available here: https://www.thingiverse.com/thing:4978659/ I liked the second remix — available here: https://www.thingiverse.com/thing:4982274 ...However, I designed a…
Note: If you are looking for the new v3 that accommodates my new vac shoe design for the 2.5" shop vac hose, it is here: https://www.thingiverse.com/thing:5011414 This is a remix of a remix. :-) I liked the first remix — available here:…
NOTE: A NEW VERSION OF THIS EXISTS. There is now a remix of a remix. :-) I liked this first remix — but I like the new design even better. It's available here: https://www.thingiverse.com/thing:4982274 If you still want this one, read on.…
This is a fairly simple hanger designed to let you hang @design8studio 's wonderful Jackpot board case on other surfaces. I use it to hold mine on the table I built for my MPCNC. Board case:…
Cableguide for the Tubes with 25mm/2mm on a MPCNC 2 Holes for wires ~6.2mm an 2x~2mm. conical and with cutout for the welding. Print with infill, minimum 3 walls 3 bottom/top layern, no supports needed. Write me if you need changes or…
You will need two M2x10 self-tapping screws to mount the endstop (for sourcing you can take a look at the Voron 0.1 BOM https://vorondesign.com/sourcing_guide?model=V0.1 ), the existing M3 screws of the lead screw nut can be reused.…
MPCNC Primo mount for Mafell FM 1000 (PV). It has a 43 mm Euro Mount that might fit other tools as well. Remix of https://www.thingiverse.com/thing:4827280 by LukeSilver I changed the diameter and length of the screw an the nut, that the…
A nice looking controller box for the RAMBo 1.4 and the RepRapDiscount Full Graphics Smart Controller. This setup is for an MPCNC but can easily be used for other machines as well. I recommend that you set the fan to blow from inside out…
This is a simple but quite tricky to model adapter to allow a standard vacuum cleaner to fit the oval outlet port on the LowRider2 CNC in the nicest possible way. My other Lowrider mods may be found here: MPCNC _ LowRider2 Collection
A simple mount designed to screw onto the LowRider2 to mount @RyanZ's Gnarly Rambo/Archim Case off the face of the Y plate. USE MY MOUNT FOR REMOVABLE GRAPHIC CONTROLLER to fit your graphic controller in position clear of moving parts.
Purely decorative end caps for the LowRider 2 MPCNC. I have made the inner flanges perhaps a little too thin to maximise space for cables, and I did snap a few off removing them when printed in PLA. PETG gives enough flexibility for them…
This is an easy to print, no support necessary cover for the side steppers on the LowRider 2. There are zillions of them happily in operation without these covers, but I like them, so mine has them! Print with the front face down, with a…
Most people don't seem to worry about power cable management on the LowRider 2, and it's pretty clear that simple is best. I don't like the thought of cables moving where I can trip on them or get tangled up in some of my untidyness, so I…
2 mounts included - sticker cutter - pen mount Some screws, nuts (3mm) needed, rubber, 8mm steel rods and lmu 8mm bearings.
Here is my take on the MP CNC joystick. Basic controls X Y Z and speeds with 3 buttons for homing and reset coordinates. Using the code from https://www.thingiverse.com/thing:3986022/files And connecting to serial port 1 on ramps 1.4…
Aufnahme für meinen Ortur laser 15W (4500mW) Der Laserkopf wird mit 3x M3 Schrauben am Adapter befestigt. Translated with Google Recording for my Ortur laser 15W (4500mW) The laser head is attached to the adapter with 3x M3 screws. Print…
Remix of Nick's MPCNC dust shoe ( https://www.thingiverse.com/thing:2797108 ) and ZQ8Blazer's ( https://www.thingiverse.com/thing:2908356 ) for a 2.5-in. shop vac hose with a support rib and taller hose insert. I had to increase the…
Eine einfache Halterung die man mit einer Schraube befestigt wird. Ich habe sie dafür verwendet um meine Aluschiene zu befestigen, worauf die Schleppkette liegt. Für die Befestigung an dem 25,4 Rohr wird eine M5 mit einer länge von…
Kabelhalterung mit Winkel für die Kabel an der der Z-Achse. Der Winkel passt an einem 25,4mm Rohr. Ich habe noch einige Löcher rein gemacht zum fixieren der Kabel mit Kabelbinder.
Okay, so I got fed up with the tool mounts available, and did this one. It's printed in 2 parts. One is the arm that holds the pen. It covers a 45° arc and has 2 thin arms that should be flexy but keep the pen parallel to the cylinder…
UPDATE: These designs are obsolete, or at the very least, very dated. I would recommend checking to see if anyone has made something more recent. I don't think these will fit properly in the current universal mounts for the 525 and other…
"Electronics tower" is a little grandiose, but that's what I call it. This is basically a mount to attach a terminal block and other things to the JTP laser mount designed by DuctSoup and remixed by me for HicWic's universal tool mount…
Link to the router - https://www.harborfreight.com/power-tools/routers-cutout-tools-lathes/routers-cutout-tools/12-hp-14-in-trim-router-62659.html Print this however you like- I used PLA at 20%. My biggest advice is to keep CNC jobs short…
Ein Pultgehäuse für das Drehzahlpoti de Chinaspindel zum Anschrauben. OpenSCAD ist dabei, wer es anpassen möchte. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Noyes…
This is a very basic mount to be screwed on the 25mm pipe-ends of the MPCNC Primo 25mm version to easily attach dragchains, cables or dragchainsupports. If you want to use them on both ends of the tube, please mirror the model in your…
Two types of plugs to close open ends of 25/2mm tubes on MPCNC. One type with cables and one without cables. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 20% Filament: Noyes PLA…
Update October 2022: Revised the case design slightly. Inforced screwin-bolts, added clearances for LED and buttons, adjusted joystick-opening. Version 2b. Version 2 still in for reference Update November 2019: I made a PCB for the…
I am using this spindle on my MPCNC: https://www.aliexpress.com/item/CNC-Spindle-500W-Air-Cooled-0-5kw-Milling-Motor-Spindle-Speed-Power-Converter-52mm-Clamp-13pcs/32702579251.html?spm=a2g0s.9042311.0.0.4b524c4dvs86Ks Due to my own…
This is an adapter to use on the dustshoe from @PCFlyer https://www.thingiverse.com/thing:1949521 It is fully configurable to your needs. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2…
I designed this probe to help me determine the z variance of my spoil board but it could also be used to help build a mesh for uneven stock. The probe is designed to press-fit over the endmill. It is possible to modify the probe to…
Mostly Printed CNC tool mount for the Harbor Fright* 3.5A Electric Cutout Tool. Should be a solid mount for a cheap tool (<$20 on sale using a coupon). http://www.harborfreight.com/electric-cutout-tool-42831.html *FRIGHTful how much…
Requirements: 3d printer with filament CNC 3mm lexan sheet Easy-Cut Strip Brush - https://www.mcmaster.com/7900T1/ M3 x 6mm Flat Head Screws - https://www.mcmaster.com/91294A126/ Assembly: Print all required parts. I used CF PETG Cut 3mm…
Upgrade your MPCNC Primo with linear guides. Info: Make sure that your tubes have a diameter of exactly 25 mm. What you need: 6x LM25UU 4x Circlip Ø=42mm and the normal parts of the MPCNC Primo. To Print: 2x Upper_belt 2x Upper_belt_M 2x…
I designed and printed 5 of these hooks for hanging my Accut-Cut XL track on my LowRider 2 MPCNC's table. I needed a place to store the track when not in use that was both out of the way and accessible when needed. To see my table design…
This is an adapter for the MPCNC Lowrider V2's dust port :) Fits a normal 2 1/2 inch vacuum/dust hose I'd recommend to use some tape to secure it to the MPCNC's dust port after sliding it on to keep it secure Category: 3D Printer Parts
it uses m4 nuts and bolts with your standard small loc-line nozzle you can buy on amazon. Mount the Loc-Line to your router then via a small airline connect it to a mounted regulator so you can just pressure mid cut without having to stop…
Remix of the MPCNC Modular Electronics Mount to support the YB4835VA 0-100V 20A Double Display Voltmeter Current Meter…
This remix adds support for an MKS sbase v1.3 board instead of the RAMPS board. Updated 19/03/2016 made the upper one slightly easier to print without supports Related Items http://www.thingiverse.com/thing:2187488 YB4835VA Holder…
Modular stackable case for Raspberry Pi and MKS Gen L. Same system could be extended to accommodate Raspberry Pi B and Rambo, possibly LCD, and maybe house buck converters or other items (perhaps Joystick). When not much horizontal space…
Replacement nut traps for Burly and Primo. (Sizes "C", "F", and "J" all use the same nut traps so far.) Burly size accommodates #6-32 nuts or M4 nuts, while Primo accommodates M5 nuts. This nut trap has an extra small plate that can be…
Work in progress, and repository for some of the modified parts I'm creating in the process. XYZ_J_Burly_Label, no different from XYZ_J_Burly except that it has a label for tension bolt B XYZ_J_Burly_Label_Trimmed, similar to…
Hardly original, this is my take on a machinist style probe, similar to https://www.thingiverse.com/thing:721620 or https://www.thingiverse.com/thing:1676040 or https://www.thingiverse.com/thing:2045773 or…
Parts for automatic tool-change add-on for MPCNC. Update 04/21/2019: Added spring mount for "pogo pins" for six-pin electrical connection. Added pocket to mounts to accommodate PCB for electrical connection. Modified the standard mount…
Neje A40640 tool mount for MPCNC Kress 800 FME Tool mount BASE: https://www.thingiverse.com/thing:4882916 Allows to quickly change tool from Spindle to Laser, only 2 screws to remove. Laser will fit with a little force at 0.3 resolution,…
This mount is used with my universal mpcnc primo tool mount. ( https://www.thingiverse.com/thing:4983010 ) Category: 3D Printer Parts
The two mounts are used to mount to my universal mpcnc primo tool mount. ( https://www.thingiverse.com/thing:4983010 ) I also have a mount for a 40x40x28 fan here! https://www.thingiverse.com/thing:5019760 The universal tool mount is…
I wanted a universal platform for mounting hotends to my MPCNC Primo build. I have included two different types of my design. The first one only has captured nuts with through holes to bolt together, and the second one features additional…
This is a holder for a nonmirrored bondtech bmg extruder and an e3d supervolcano hotend. It also has placement for a bltouch mount. The part cooling fan will need to be mirrored in your slicing software. Further updates will be made to…
Tools for stabilizing the MPCNC PRIMO Here some quite easy but very effective tools to strengthen and stabilize the MPCNC PRIMO. * Core stabilizer : Possibility to add a second nut at the bottom of the core. It is designed for using a…
Core Adjustment Tool for the US Version (25.4mm tubes) Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get…
STANDARD PRIMO and ALU PROFILE FRAME 30x30 I have designed a support for using inductive switches with the MPCNC PRIMO. These parts can be used for the standard PRIMO with legs (pipes 25mm) but also Alu-Profiles (Frame) 30x30mm. The…
In addition to the my other accessories I have created a version for the standard PRIMO - even if you see the alu frame on the fotos. These accessories contain the following parts: * Drag-Chain-Mounts for 25mm pipes They can be used for…
Building the MPCNC Primo you typically get the effect, that the truck pipes (steel pipes on which the core is running on) are not exactly orthogonal to each other. Very often you get an angle of 89° to 90° between, which also results in…
Similar to the earlier version of MPCNC I have directly modified and optimized a couple of thing at my MPCNC PRIMO. Especially for a better calibration but also stability I have built the MPCNC on a Alu frame (30 x 30 mm) B-Type Nut 8.…
For more stability I have merged the MPCNC Tool Mount with a Makita Tool Holder. It fits with the 25mm version (metric). This Tool Mount can be used for MPCNC Burly and also for MPCNC PRIMO. Using 2 parts connected via screws resulted in…
Einige Einstellhilfen für die Z-Achse. Die Hilfen passen auf die Makita-Fräse
Diese Halterungen für Induktive Switches können individuell an allen Varianten der MPCNC PRIMO eingesetzt werden, unabhängig davon, wie der Aufbau gestaltet wurde. Aus meiner Sicht sind induktive Switches ein MUSS für alle, die wirklich…
Einige Spannvorrichtungen für die MPCNC. Mit entsprechendem Fill kann man die Spanner sehr gut für alles möglichen Materialien nutzen. Ich habe diese Spanner genutzt, um mir mit der MPCNC Spanner aus Aluminium zu fräsen.
