1 / 2
MPCNC endcap conduit bushing for cable protection (F-25mm, retrofittable)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple (1.6g of filament) rounded endcaps to protect the wiring. Can be retrofitted as the circle is open
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 81
- Makes
- 0
- Views
- 389
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple endcap for the 25mm MPCNC version.
Can be retrofitted due to it being open.
Has a larger diameter and requires some squeezing to get into the tubing but will therefore hold tightly.
The corners are also rounded to protect the wires.
Printing
- Filament: PLA/PETG
- PLA worked for me without breaking
- PETG might be better due to temperature resistance and flex
- Nozzle: I used a 0.6mm nozzle so it should also work with 0.4mm
- Layer height etc: doesn't really matter
- The smaller the layer height, the better the rounded corners (use variable layer height)
- Bed adhesion: Smooth PEI sheet for PLA
- Important since the contact surface is rather small.
- A brim is not recommended as this will leave some sharp edges
♥ If you have questions or like this print, consider leaving a like, comment or a make. Thank you! ♥