1 / 1
MPCNC Primo Z-Rail Drilling Jig (for all sizes)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MPCNC Primo Z-Rail Drilling Jig (for all sizes)
- Rating
- 3 / 5
- Likes
- 4
- Downloads
- 48
- Makes
- 0
- Views
- 136
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simply print off either the 23.5, 25, or 25.4mm OD model for your size of conduit, insert 2 ea. M5x30mm screws and 2 ea M5 nylock nuts(from the BOM), then your Z-rail flush with the “flush end” printed on the jig, then use the 2 holes to drill out your 8mm holes into the conduit. I was able to get away with only using one bolt/nut since it doesn’t need much pressure to keep the pipe in place.
.step and .stl are available for each size for your remixing pleasure. Print standing as it is imported.