1 / 1
MPCNC Primo Z-Rail Drilling Jig (for all sizes) — zdjęcie 1

MPCNC Primo Z-Rail Drilling Jig (for all sizes)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MPCNC Primo Z-Rail Drilling Jig (for all sizes)

Ocena
3 / 5
Polubienia
4
Pobrania
48
Wydruki
0
Wyświetlenia
136
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Simply print off either the 23.5, 25, or 25.4mm OD model for your size of conduit, insert 2 ea. M5x30mm screws and 2 ea M5 nylock nuts(from the BOM), then your Z-rail flush with the “flush end” printed on the jig, then use the 2 holes to drill out your 8mm holes into the conduit. I was able to get away with only using one bolt/nut since it doesn’t need  much pressure to keep the pipe in place.

.step and .stl are available for each size for your remixing pleasure. Print standing as it is imported.

Tagi