Dremel 4000 MPCNC Primo Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This set of design provides a mount for the Dremel 4000 router unto the Primo version of MPCNC (Mostly Printed CNC).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 0
- Views
- 399
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This set of design provides a mount for the Dremel 4000 router unto thePrimo version ofMPCNC (Mostly Printed CNC).
Print Settings
Resolution: .025
Infill: 35%
Notes:
PTEG is recommended for these parts since strength and some flexibility is required to securely fasten the router in place on the Z Axis gantry.
Post-Printing:
Mounting hardware is M5 screws 25mm in length or as supplied by V1 Engineering.
How I Designed This
The mount is in two parts. The lower mount is designed to capture the bottom of the Dremel 4000. A special screw-on ring is provided that replaces the stock screw-on end of the router. The lower mount captures this adapter and holds it in place using a clamping screw in the pinch bracket that is part of the lower mount.
In like manner the upper mount captures the router body 75mm above the lower mount and keeps the router from twisting out of place under load.
The two adaptors attach to the Nut Trap provide by V1 Engineering printable .stl file. See https://docs.v1engineering.com/mpcnc/PParts/.
Category: Machine Tools