SeaDoo ST3 Fishpro Second Battery Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SeaDoo ST3 Fishpro Second Battery Mount..
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 288
- Wydruki
- 1
- Wyświetlenia
- 1956
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder has been designed to be glued into the hull of the fishpro.
(The photos here are of a larger Lithium battery on my first version of the battery holder.)
I have designed the holder to have a large surface area touching the hull for maximum adhesion.
Features:
Allowance for straps - ( i use larger Cable ties )
Low center of gravity.
Drain Holes.
Easy install – ( I recommend scrubbing the inside of the hull with a warm dishwashing solution and a scrubbing brush. Dry well them i used ISOPROPYL ALCOHOL to make sure there was no residue. Then i covered the whole underside of the printed surface with a High-performance MS sealant adhesive.. Push into place and try to force the glue to squeeze out from the perimeter of the holder. I left mine for a few days for the glue to cure.)
https://www.motobatt.us/MBTX20U