SeaDoo ST3 Fishpro Second Battery Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SeaDoo ST3 Fishpro Second Battery Mount..
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 288
- Makes
- 1
- Views
- 1,956
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This holder has been designed to be glued into the hull of the fishpro.
(The photos here are of a larger Lithium battery on my first version of the battery holder.)
I have designed the holder to have a large surface area touching the hull for maximum adhesion.
Features:
Allowance for straps - ( i use larger Cable ties )
Low center of gravity.
Drain Holes.
Easy install – ( I recommend scrubbing the inside of the hull with a warm dishwashing solution and a scrubbing brush. Dry well them i used ISOPROPYL ALCOHOL to make sure there was no residue. Then i covered the whole underside of the printed surface with a High-performance MS sealant adhesive.. Push into place and try to force the glue to squeeze out from the perimeter of the holder. I left mine for a few days for the glue to cure.)
https://www.motobatt.us/MBTX20U