54 models
This holder supports the Insta360 Invisible Selfie Stick and can clip onto the Linq System of the SeaDoo FishPro Explore.. Print solid fill With a least PetG or better. Supports have been modeled so you wont need to add your own. PLEASE…
This holder has been designed to be glued into the hull of the fishpro. (The photos here are of a larger Lithium battery on my first version of the battery holder.) I have designed the holder to have a large surface area touching the hull…
Created a GoPro Mount for a SeaDoo Spark Trixx.
This is a mount to hold a bluetooth speaker on the front of a Seadoo Spark. I designed around a JBL charge4 but it should work for just about any small or medium sized bluetooth speaker. Mounts with three m4x35 screws and three m4 nuts.…
Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.
Handlebar extensions for Seadoo Spark to fit aftermarket PWC grips such as the Odi Ruffian. Printed with PETG and 45% infill. Utilizes the original grip screw. There are multiple lengths of grips that can be installed on the Spark, I am…
Went to put my DESS key on the post this spring and it punched right through, seems the small post nut cracked. Here is a replacement that doesn't require any special tools, a simple crescent wrench will do. I printed mine in Black PETG…
Seadoo jetski GTX Start button TPU
SeaDoo Fishpro Lowrance FS9 and FS7 Sounder Centre mount Bracket..
Replacement knob for the fuel selector on many 2-Stroke Seadoo models. There are 2 models, one is a shorter version without the need for supports and a longer version modeled closer to factory. Both work fine, just personal preference.…
I needed to Mount my empty Seadoo LinkQ fuel tank to my workshop wall to keep it off the floor. This model does just that. Printed with a 0.4 nozzle in PETG. I've included a .gcode file which shows how it was split. You may wish to add…
This is made for holding carabiners on your seadoo pontoon (any model).
Modified the original model by removing material where I thought it was not needed in an effort to reduce filament usage, support material and print time. I used some modified print settings to help make the part extra rigid now that some…
Installed new speakers on my ski and needed an adapter because the OEM holes are different than most aftermarket speakers. Model is available in 156mm and 157mm spacing depending on the speakers you use. I used M4 heat set inserts placed…
I have just created a new product. This cap fits on the end of the FP rod holder preventing your fishing rod from dropping through the base of the holder and damaging your mats.. Easy install.. I have printed with TPU…
Sea-doo shock end 269501717. Designed for a plastic insert that can be bought from Mcmaster Carr or other online retailers. https://www.mcmaster.com/94459A190/
I created these backers as I had been damaging my kicker speakers about once per season and I have a theory that air pressures could've been adding to the cause of this and I also wanted a way to quickly change damaged speakers without…
Here you can find a spare part for a Seadoo Speedster 150 (also used with other Seadoos) Rubber Bumper PartNr. 204071739. In the spare parts trade the part is much too expensive about 30€ ($27.25) per part.…
Seadoo Latch-Cover (Part #291000165) This is a replacement latch for the front cover (storage compartment) on earlier model Seadoo personal water craft. It was designed to look very similar to the original, but because TPU tends to have…
My buddy had to replace his computer because of the brutal FL direct sun. This time he asked me to design a cover It was a fun but challenging project for me. Fortunately he was able to pull off the beveled frame And leave it with me.…
STLs and F3D files are attached so you can easily edit the parts if need be. WARNING - THIS WILL NOT BE WATER TIGHT! Unless you silicone the living hell out of everything which kinda defeats the purpose of having changeable lowers. My…
WIngnut for the back of the pto cover. Print with 100% infill in your choice of filament. The nut is threaded but for proper fitment run a 8mm x 1.25 tap through and then it threads perfectly.
Trim tabs for a Seadoo X4 hull. These reduce proposing at speed, make the hull much more stable. The two hafts lock together with the center “bow tie” and some epoxy. Enjoy riding!
Not going to lie, it is AI generated, so it's not perfect, but it's not bad.
Seadoo Fishpro Garmin Backing Plate for the terminals of the Garmin FishFinder..
Retrofit the GME Black box VHF Radio to the SeaDoo FishPro. Remove the plastic phone cover inside the glovebox then install the Handpiece mount.…
Hi All --- I have published a new 3d model today ready for printing. Water pickup for a live bait tank. This is a simple attachment that clips onto the trim tab with a single bolt to hold it into place. I use the 12mm High-Pressure…
FISHPRO Adapter for the NSX3007.. https://www.simrad-yachting.com/en-au/simrad/series/nsx/nsx-3007-ai-xdcr--ausnz-chart/
Seadoo charm accessory for any Jetski or Boat enthusiast Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0.12mm Infill: 20 Category: Keychains
The original gray cup holders on a Seadoo Switch were browning from sunlight/weather exposure and instead of printing all new cup holders I created a small cover. Instead of matching the gray exactly I used a fluorescent PETG. I'm not…
This is a replacement clip for Seadoo covers. Just grab a needle and some thread and sew it back on.
Instead of purchasing another overpriced cooler for my Seadoo, I decided to come up with a cheap alternative. Screw jack attachments slip easily in the rubber feet on the Yeti Tundra 35, and relatively inexpensive LinQ brackets can be…
This particular project was done on a Seadoo spark, but I believe Seadoo uses these same mechanisms on other skis. Speed ties… great until they don't retract properly, especially if you have done any speaker modifications where a long…
Hi... Since my mirror holder broke off on the last ride with my Seadoo Speedster 150, I decided to print a new one. It is attached to the waketower with 4x M6x35 Allen screws. The Waketow bar has a diameter of 47.6mm and the arm for the…
1996 SeaDoo GTX Choke Puller Requires (1x) M2x12 socket head machine screw Designed to take two screws, but I didn't allow enough tolerance for that to work out.
Mostly exact copy of a Seadoo Speedster 1996 carburetor cover clip.
12v Milwaukee Battery Enclosure for the SeaDoo ST3 Hull – Not for resale or remix. no supports required. the back of the holder sits on build plate 1st layer . printed with petgcf the cap is tpu Fixing – 50x6mm SS screw. 2 Blade…
Print standing like a T with tree support. PETG or better, but PLA will do if not left in the sun. Use Orca/Prusa to a modifier cube to the top of the T to increase layers. I did 6 walls and 5 top layers. The original is threaded so…
I decided to make a remix to match the style of the original knob
Other models of these found didn’t have a good alignment to bolt holes within boat.
Seadoo charm accessory for any Jetski or Boat enthusiast Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: No **Resolution:** 0.12mm Infill: 20 Category: Keychains
This project is intended as a DIY replacement to the original Seadoo VTS controller found on 90's Seadoo X4 (XP & SPX) hull PWC’s. These VTS units often fail due to a combination of burnt circuit board traces, corrosion, and failed reed…
I made this part after landing a jump a little bit too hard on my seadoo breaking the original latch base for my storage compartment. I saw this part is widely available online for a reasonable price but decided to whip up a model anyway.…
Combined Luca Mis's 3 part design into 1 single part for larger printers. Will fit ~256x256 or larger
Trim tabs for a Seadoo X4 hull. These reduce proposing at speed, make the hull much more stable. One piece for larger printers.
Compatible grips for a 1996 SeaDoo XP jet ski. This is a replacement part for the hex sleeve that prevents grips from spinning on the jetski and an outer grip (the outer grip can be replaced with a generic 1" ID grip). I printed the…
1996 SeaDoo GTX Choke Puller Requires (1x) M2x12 socket head machine screw Designed to take two screws, but I didn't allow enough tolerance for that to work out.
Trim tabs for a Seadoo X4 hull. These reduce proposing at speed, make the hull much more stable. The two hafts lock together with the center “bow tie” and some epoxy. Enjoy riding!
Combined Luca Mis's 3 part design into 1 single part for larger printers. Will fit ~256x256 or larger
Files for 3 degree down shims (makes the OEM trim tabs effectively neutral instead of tapered upward) and extended trim tabs with a 3 degree upward taper. Both shims and the tabs improve Seadoo X4 Hull stability, the extended trim tabs…
