Wall Mount for SeaDoo LinkQ parts
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.67 – €3.26 net (excluding VAT)
For file: Seadoo LinkQ Wall Mount Block_0.4n_0.2mm_PETG_MK3S_2h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.96 excluding VAT (range midpoint).
- Weight reported by the author
- 44 g
- Print time reported by the author
- 2.77 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This model allows users to mount an empty Seadoo LinkQ items to the wall of their garage or workshop
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 107
- Makes
- 0
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
I needed to Mount my empty Seadoo LinkQ fuel tank to my workshop wall to keep it off the floor. This model does just that.
Printed with a 0.4 nozzle in PETG. I've included a .gcode file which shows how it was split. You may wish to add solid areas around the screw holes.
The part is split into two and dowelled together. Use glue to secure the two parts together then screw to the wall using suitable 3mm screws. Two parts are required.