2-in-1 Modular Desk Organizer and Transport Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modular desk organizer and transport case. With dividers to ajust the size of the compartments and a lid to close it.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 409
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Introduction
As so often, this design came to life as a fix for an issue I had. My desk became more and more disorganized as my collection of pencils, markers and stuff in general kept on growing over the last few weeks.
In order to escape the mess (I know, I know, username checks out), I saw two options:
- Buy some pencil cases to put my stuff into. However, I am sort of lazy and will not necessarily put the pencils back and store the cases in a sensible way after I finished using them.
- Use a desk organizer for my stuff. This also does not seem ideal, since I like to take some markers with me from time to time. So I would need to again use a pencil case of some sort for transportation.
But wait, there might be a third option. Could there be a way to combine the two? I would think so. And that's why I designed this object. You want to print one (or two or three) for yourself? Just read on!
Printing Instructions
I printed the models you can see in the pictures on a Prusa MK3S+ without any issues. You should also be able to print them on printers with a slightly smaller build volume, if you play around a bit with the position and orientation of the objects.
The organizer consists of multiple parts:
- The case (this is the main part)
- The lid (this is used to close the case for transportation)
- Dividers (use these for organization when used as a desk organizer; they come in two sizes)
I recommend to print the case in PLA. The rigidity of the PLA helps the lid to stay in place during transport. I printed the case with a layer height of 0.3mm without issues.
The lid needs to be printed with a flexible material. I used TPU with a shore hardness of 98A, which works just fine.
The dividers are designed in a way that they also fit into the case with the lid closed. I recommend to print 3 dividers in standard size. This will cover most use cases. If you have a lot of small objects, feel free to print some more dividers and to also use the short divider.
Final Words
If you have questions, remarks, suggestions, I would be happy to hear from you.