BOSCH GEX 125-150 AVE Vacuum Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a vacuum adapter for Bosch GEX 125-150 AVE random orbit sanders.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 365
- Wydruki
- 3
- Wyświetlenia
- 3426
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a vacuum adapter for Bosch GEX 125-150 AVE random orbit sanders. It uses the same design for attaching to the sander as the official Bosch adapters. The gcode is for printing with Flexible filament. I used Fillamentum Flexfill 98A with good results.
First I used 25% infill which might be a bit much, because it is a bit difficult to put the adapter on the sander. Once it's on it doesn't come off easily but rotates freely. You can try 10% infill for an easier fit.
The Fusion 360 model file has some user parameters you can play with for a different vacuum hose diameter.
Print instructions
I printed with 0.2mm layer height. Differences from the stock PrusaSlicer 2.2.0 Flexfill 98A settings:
- extrusion multiplier: 1.1
- keep fan always on at 70%
- retraction length: 1.2mm
- lift Z: 0.6mm
- max print speed: 30 mm/s
Print with 25% infill or less. 5-10% infill will be easier to put on and off if you're planning to switch between adapters or dust bags.