Laser etched night light base with no soldering LED strips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made some base pieces to make customized laser etched night lights for an intro to laser cutting class
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
Base for holding acrylic panels up for a customized LED diffused night light. Two parts, set the print orientation for no supports, 0.2mm layer height, 15% infill, polyterra PLA, etc., etc.
For the panels I used 2.7mm cast acrylic (https://www.amazon.com/gp/product/B09FHYDGM1) which were cut into 97mm x 97mm squares and laser etched with different designs.
For the LEDs, I used a white strip 5V (https://www.amazon.com/gp/product/B08M65DKZ7) which I cut into 6 LED segments (one roll is enough to make more than twelve) and then were fitted onto these connectors (https://www.amazon.com/gp/product/B01MY7K8IT) which don't require any soldering. Just peel the backing off the LED strip and stick them onto the 3D prints.