Laser etched night light base with no soldering LED strips
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made some base pieces to make customized laser etched night lights for an intro to laser cutting class
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 86
- Makes
- 0
- Views
- 545
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Base for holding acrylic panels up for a customized LED diffused night light. Two parts, set the print orientation for no supports, 0.2mm layer height, 15% infill, polyterra PLA, etc., etc.
For the panels I used 2.7mm cast acrylic (https://www.amazon.com/gp/product/B09FHYDGM1) which were cut into 97mm x 97mm squares and laser etched with different designs.
For the LEDs, I used a white strip 5V (https://www.amazon.com/gp/product/B08M65DKZ7) which I cut into 6 LED segments (one roll is enough to make more than twelve) and then were fitted onto these connectors (https://www.amazon.com/gp/product/B01MY7K8IT) which don't require any soldering. Just peel the backing off the LED strip and stick them onto the 3D prints.