RadioShack Soldering Iron Holder Endcap for Pinecil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RadioShack Soldering Iron Holder/Cleaner Endcap that fits Pinecil
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v2.0
Got a Pinecil V2 recently but found that the RadioShack Soldering Iron Holder/Cleaner combo didn't fit the Pinecil, so I decided to create an end cap that's essentially the same design as the original but it's designed to fit the Pinecil perfectly. It may be able to fit the TS100 but I don't have that iron so I can't confirm. Designed it in Freecad. I printed this out in PLA but I may go back and print it out in PETG (or even ABS) just to be on the safe side in case the iron's heat causes the part to warp, although I do not anticipate it being an issue since the iron's tip is the hottest part of the iron (and where the endcap holds the iron does not receive not nearly as much heating).
Print Settings:
Printer: Custom Prusa i3 Clone “Chimera” running Klipper
Slicer: SuperSlicer 2.4.58.5
Layer Height: 0.2
Supports: None
Infill: 13
Infill Pattern: Rectilinear