1 / 9
Bike Clip SIGMAR to SELLE ROYAL — zdjęcie 1
1 / 9

Bike Clip SIGMAR to SELLE ROYAL

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip for SELLE ROYAL ICS-System saddle to fit SIGMAR NUGGET II

Ocena
0 / 5
Polubienia
10
Pobrania
111
Wydruki
0
Wyświetlenia
962
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Hi, 

this is a clip to fit the SIGMAR NUGGET II bike light to the SELLE ROYAL ICS sattle system.

  1. First print both split parts “right" and "left” (70%infill 3 perimeters)
  2. connect the rubber band of the NUGGET II to the clip
  3. push the clip into the ICS sattle
  4. pray the thing doesnt fall off (2Weeks test on gravel bike succesful:)

I used PETG as a material. Other material might be more or less stiff for the snap fit but will work too I guess. 

If you are a specialist with support and overhang maybe you can print the part as whole and not use the split ones. I added the part for you experts out there as well.

Tagi